Mean Mister Mustard CB750F

Mean Mister Mustard CB750F

Brady Young's latest build out of Seaweed & Gravel Garage is a 1980 CB750F. This was built as a shop bike for Seaweed and Brady got inspired to have creative license with this one. The mono shock was something he had been thinking about for some time. We are very pleased how it came out. The performance and sound on this bike is amazing. Here are some photos to share, shot in Leucadia.

 

1980 Honda CB750f “Mean Mister Mustard” We picked up this 1980 Honda CB750f as a decent runner but showing it’s age. It was used as an extra bike for rides while we worked out a few mechanical and tuning issues. After a bit of time we where able to scrub some time off our build list to make room for this project. The original plan was for a simple clean up, paint, and back on the road. It is safe to say things didn’t go as planned. It was when mocking up the twin shock mounts on the new sub frame something wasn’t looking quite right. After stepping back and staring for a while, the solution was right in front of me. It was one of the shocks resting on the swing arm. At this point the project grew up from a quick build to full project. The mono shock was donated from a ZR750, and after doing some math was mounted on the reinforced frame and swing arm. The front end was lowered 1.5in (38mm) with a fork brace added. To better follow the new lines on the bike, the tank was raised and new mounts were made. The extra space under the tank houses the electrical components with a new custom harness tying then together. Allowing the motor to breathe better with Uni filters and 4-1 exhaust with a reverse cone muffler proved the clutch to be a weak link. Beefier plates and springs were added to handle the additional power. We raised the pegs and used tracker handlebars to adjust the riding position for the stance and improved geometry. Deciding on the paint design proved to be a difficult decision. After many ideas and renderings we landed on a matte desert tan and gloss black. We are very happy with the results and it is incredibly fun to ride. Its maiden run was up the famous Palomar Mountain and well surpassed our expectations.

Before Image, stock CB750F

1980 Honda CB750f

Custom built subframe
Converted to mono shock w/ reinforced swingers mated with a ZR750 adjustable shock
Rebuilt and lowered front forks
Rebuilt brakes
Custom 4-1 exhaust
Raised and custom side mounted fuel tank
Frenched in neutral and oil pressure dummy lights on top triple tree
Repositioned mid-sets
Fully tuned carbs

There are many modifications as well to smooth and clean the lines on the bike that go unnoticed as well. here is a write up on the bike also:

1980 Honda CB750f “Mean Mister Mustard”

 We picked up this 1980 Honda CB750f as a decent runner but showing it’s age. It was used as an extra bike for rides while we worked out a few mechanical and tuning issues. After a bit of time we where able to scrub some time off our build list to make room for this project. The original plan was for a simple clean up, paint, and back on the road. It is safe to say things didn’t go as planned. It was when mocking up the twin shock mounts on the new sub frame something wasn’t looking quite right. After stepping back and staring for a while, the solution was right in front of me. It was one of the shocks resting on the swing arm. At this point the project grew up from a quick build to full project.


 The mono shock was donated from a ZR750, and after doing some math was mounted on the reinforced frame and swing arm. The front end was lowered 1.5in (38mm) with a fork brace added. To better follow the new lines on the bike, the tank was raised and new mounts were made. The extra space under the tank houses the electrical components with a new custom harness tying then together.


 Allowing the motor to breathe better with Uni filters and 4-1 exhaust with a reverse cone muffler proved the clutch to be a weak link. Beefier plates and springs were added to handle the additional power. We raised the pegs and used tracker handlebars to adjust the riding position for the stance and improved geometry.


 Deciding on the paint design proved to be a difficult decision. After many ideas and renderings we landed on a matte desert tan and gloss black. We are very happy with the results and it is incredibly fun to ride. Its maiden run was up the famous Palomar Mountain and well surpassed our expectations.
_________________________________________________________

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.